Size guide for Down Jackets & Jackets

Please select the size guide that you need :

HOW TO TAKE YOUR MEASUREMENTS ?

Get your tape measure and a similar garment from your wardobe. Lay the garment out on a flat surface. To find your size, measure the garment with the help of the diagram and then consult the corresponding size chart :

Jackets

• 1/2 Chest (A) : Button up the jacket. Place the tape measure horizontally (2,54 inch below the armpits) and measure the distance from one end to the other.
• 1/2 Bottom (B) : Measure the distance between the two seams at the bottom of the jacket.
• Sleeve lenght (C) : Place the tape measure from the shoulder seam to the sleeve's bottom.
• Shoulder lenght (D) : Measure the distance between collar and sleeve's seams.
• Back accross (E) : Measure the distance between both shoulders.
• Back lenght (F) : Place the tape measure vertically and measure from collar at back' bottom.

Leather jacket : FAUSTIN

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather jacket : Fulbert

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather Safari jacket : Frémond

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather jacket : Carter

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather jacket : Sean

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Cotton jacket : Félicien

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Corduroy jacket : Fidélien

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Mid-season jacket : Erland - Edvin

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather Safari jacket : Falbert

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Wool jacket : Corbyn

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather jacket : Cayden

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather jacket : Everett II

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

HOW TO TAKE YOUR MEASUREMENTS ?

Get your tape measure and a similar garment from your wardobe. Lay the garment out on a flat surface. To find your size, measure the garment with the help of the diagram and then consult the corresponding size chart :

Down jackets

• 1/2 Chest (A) : Button up the jacket. Place the tape measure horizontally (2,54 inch below the armpits) and measure the distance from one end to the other.
• 1/2 Bottom (B) : Measure the distance between the two seams at the bottom of the jacket.
• Sleeve lenght (C) : Place the tape measure from the shoulder seam to the sleeve's bottom.
• Shoulder lenght (D) : Measure the distance between collar and sleeve's seams.
• Back accross (E) : Measure the distance between both shoulders.
• Back lenght (F) : Place the tape measure vertically and measure from collar at back' bottom.

Long sleeve Down jacket : Sivert

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Men's down jacket : Olson

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Sleeveless down jacket : Niels II

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Sleeveless down jacket : Nilsen

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Light down jacket : Sven III

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Quilted blazer : Torsten

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Leather jacket : Niklas

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

HOW TO TAKE YOUR MEASUREMENTS ?

Get your tape measure and a similar garment from your wardobe. Lay the garment out on a flat surface. To find your size, measure the garment with the help of the diagram and then consult the corresponding size chart :

Parkas

• 1/2 Chest (A) : Button up the jacket. Place the tape measure horizontally (2,54 inch below the armpits) and measure the distance from one end to the other.
• 1/2 Bottom (B) : Measure the distance between the two seams at the bottom of the jacket.
• Sleeve lenght (C) : Place the tape measure from the shoulder seam to the sleeve's bottom.
• Shoulder lenght (D) : Measure the distance between collar and sleeve's seams.
• Back accross (E) : Measure the distance between both shoulders.
• Back lenght (F) : Place the tape measure vertically and measure from collar at back' bottom.

Winter Parka : Soren II

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).