Please select the size guide that you need :

HOW TO TAKE YOUR MEASUREMENTS ?

Get your tape measure and a similar garment from your wardobe. Lay the garment out on a flat surface. To find your size, measure the garment with the help of the diagram and then consult the corresponding size chart :

Trousers

• 1/2 of the waist band (A) : Place the measuring tape horizontally and measure the distance between the two seams.
• 1/2 of the hip (B) : Measure the distance between the two seams.
• Inside leg (C) : Place the measuring tape vertically, running from the seam on the crotch to the bottom of the trouser leg.
• Crotch (D) : Place the measuring tape vertically, running from the seam under the waistband to the crotch seam.
• 1/2 Lower leg (E) : Measure the distance between the two seams at the bottom of the trouser leg.
• 1/2 Thigh (F) : Measure the distance between the two thigh seams.

What trouser cut suits you best ?

Adjusted fitted trousers

A fitted cut is close to the body, without being clingy, and shows off your body shape. If you are torn between 2 sizes, we recommend you go for the larger size.

Standard fit trousers

A standard fit is a straight cut, with carefully measured proportions for maximum comfort.

Slim fit jeans

A slim fit skims the body in order to show off its shape. If you're torn between 2 sizes, we recommend you go for the larger size.

Standard fit jeans

A standard fit is a straight cut, with carefully measured proportions for maximum comfort.

Adjusted fitted chinos : Norman – Norwell – Myles - Layton

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Adjusted fitted trousers : NIGEL II

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Adjusted fitted chinos : Kyrk - Keaton - Nolan - Keanan - Karson

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Standard fitted chino : Jerry

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Standard fitted chino : Jerry II

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Standard fitted chino : Jake

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Standard fitted jeans : Chuck II

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Slim fitted jeans : Ridley - Kolton

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

HOW TO TAKE YOUR MEASUREMENTS ?

Get your tape measure and a similar garment from your wardobe. Lay the garment out on a flat surface. To find your size, measure the garment with the help of the diagram and then consult the corresponding size chart :

Bermuda shorts

• 1/2 of the waist band (A) : Place the measuring tape horizontally and measure the distance between the two seams.
• 1/2 of the hip (B) : Measure the distance between the two seams.
• Inside leg (C) : Place the measuring tape vertically, running from the seam on the crotch to the bottom of the bermuda leg.
• Crotch (D) : Place the measuring tape vertically, running from the seam under the waistband to the crotch seam.
• 1/2 Lower leg (E) : Measure the distance between the two seams at the bottom of the bermuda leg.
• 1/2 Thigh (F) : Measure the distance between the two thigh seams.

Bermuda short : Barry - Borys

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).

Bermuda cargo shorts : Cody - Corben - Corben II

Leeway: +/- 0.5cm - 1cm (depending on the parts being measured).