HOW TO TAKE YOUR MEASUREMENTS ?
Get your tape measure and a similar garment from your wardobe. Lay the garment out on a flat surface. To find your size, measure the garment with the help of the diagram and then consult the corresponding size chart :
- 1/2 Chest (A) : Button up the jacket. Place the tape measure horizontally (2,54 inch below the armpits) and measure the distance from one end to the other.
- 1/2 Bottom (B) : Measure the distance between the two seams at the bottom of the jacket.
- Sleeve lenght (C) : Place the tape measure from the shoulder seam to the sleeve's bottom.
- Shoulder lenght (D) : Measure the distance between collar and sleeve's seams.
- Back accross (E) : Measure the distance between both shoulders.
- Back lenght (F) : Place the tape measure vertically and measure from collar at back' bottom.
Long sleeve Down jacket : Sivert
Leeway: +/- 0.2 inch - 0.4 inch (depending on the parts being measured).
Men's down jacket : Olson
Leeway: +/- 0.2 inch - 0.4 inch (depending on the parts being measured).
Sleeveless down jacket : Niels II
Leeway: +/- 0.2 inch - 0.4 inch (depending on the parts being measured).
Sleeveless down jacket : Nilsen
Leeway: +/- 0.2 inch - 0.4 inch (depending on the parts being measured).
Light down jacket : Sven III
Leeway: +/- 0.2 inch - 0.4 inch (depending on the parts being measured).